Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SCANAMID 6 B12^ FC - PA6 - Polykemi AB

Material Data Center offers the following functions for SCANAMID 6 B12^ FC:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Scanamid 6 datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性干 / 已调节单位Test Standard
ISO数据
模塑收缩率, 平行 1.0 / * % ISO 294-4, 2577
模塑收缩率, 垂直 1.1 / * % ISO 294-4, 2577
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸强度 80 / 60 MPa ISO 527
屈服伸长率 4 / 25 % ISO 527
断裂伸长率 35 / >50 % ISO 527
弯曲模量, 23°C 2800 / 1600 MPa ISO 178
简支梁缺口冲击强度, +23°C 5 / 18 kJ/m² ISO 179/1eA
ASTM数据
邵氏硬度D 77 / - - ASTM D 2240
热性能干 / 已调节单位Test Standard
ISO数据
热变形温度, 1.80 MPa 70 / * °C ISO 75-1/-2
热变形温度, 0.45 MPa 185 / * °C ISO 75-1/-2
维卡软化温度, B 200 / * °C ISO 306
1.5mm名义厚度时的燃烧性 V-2 / * class IEC 60695-11-10
测试用试样的厚度 1.6 / * mm -
灼热丝引燃温度 (GWIT) 750 °C IEC 60695-2-13
GWIT - 测试用试样厚度 2 mm -
其它性能干 / 已调节单位Test Standard
密度 1130 / - kg/m³ ISO 1183
典型数据
加工方法
注塑
供货形式
碎粒料
地区供应
欧洲, 亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.